1.The Silent Diesel Generator Set and control panel are protected by electricians and professional maintenance personnel, and propose large-scale maintenance or small-scale maintenance according to the operating conditions, and lubricate each connection point and actuator connecting rod regularly to check whether the fixing of each fixed point is reliable and firm , Strong loose bolts.

2. Full-time maintenance personnel perform silent diesel generator south africa maintenance and protection in accordance with the gen power generator protection requirements, and record the operation process and the number of replacement parts, and fill in the generator commissioning/operation record table.

3. The inspection contents are as follows:

(1) Lubrication system: check the liquid level and oil leakage; replace the oil and oil filter;

(2) Air inlet system: check the air filter, pipe position and connector; replace the air filter;

(3) Exhaust system: check exhaust blockage and air leakage; discharge muffler carbon deposits and water;

(4) Some silence generator: check the air inlet blockage, wiring terminals, insulation, vibration and whether the components are normal;

(5) ) Replace the oil, various oil barriers and air barriers according to the actual conditions;

(6) Clean the control screen once a month, check and perform maintenance and protection operations, compare the operating parameters before and after the protection, summarize the protection process, and complete the protection protection statement;

(7) Cooling system: check the radiator, throat and connector; water level, belt tension and water pump, etc., regularly clean the cooler fan filter and cooler fan bearing;

(8) Fuel system: check the fuel level, speed limiter, oil pipe And connectors, fuel pump. Drain (fuel tank and oil-water separator sediment or water), replace diesel filter;

(9) Charging system: check the battery charger, battery electrolyte level, density (check and charge the battery once a week) appearance, total Switches, wiring tubes and indicator lights;

(10) Automatic control equipment: check whether the automatic equipment for imitating power supply, power failure, and starting oil machine is normal;

(11) Cleaning the unit, cleaning the periphery of the cooler every month. After checking the above tasks, start the engine group for 15 minutes (or run with load).